4 Digital LED Display Tachometer RPM Speed Meter Panel Inductive Hall Effect ...

Description

4 Digital LED Display Tachometer RPM Speed Meter Panel Inductive Hall Effect ...
Measure varied motor RPM Measure range: 10-9999 RPM
Measure varied motor RPM Measure range: 10-9999 RPM
Come with hall sensor and magnet, good stability, high preciseness and strong anti-interference ability
Input pulse signal: NPN/PNP open collector ,contact switch, contactless switch, level pulse Input signal voltage: low level: -30V -0.6 V, high level: 4-30V
The external appearance adopts standard size, convenient to install and easy to use
Measuring range: frequency: 9999Hz, 999.9 HZ, 99.99 KHZ, automatic switching selection
Digital LED tachometer adopts the latest A/D conversion chip and the high stability benchmark IC, adopts electronic chip component, reasonable circuit design. It can be applied to the measurement of voltage, current and external sensor to measure temperature, pressure, displacement and other physical quantities. Suitable for all kinds of digital instrument display.   Specifications: Measurement accuracy: ±0.1% Display mode: 0.56"LED Display refresh rate: >3 times/sec Working power supply: DC8-24V, 30mA,  measurement range: 10-9999RPM Hall proximity switch : magnetic Appearance size: 80 x 42 x 25mm/3.14 x 1.65 x 0.98inch LED display(Optional): red, blue Weight: 80g(red),105g(blue) Overrange display: the first one shows "1" or "-1", and the latter three do not show Precautions: 1. Connect the plug correctly according to the wiring diagram 2. Should avoid strong electromagnetic interference and it is better to use shielded wire or double stranded wire for measuring conductors 3. The counting signal of the counter and the switch of the zero clearing signal input or the circuit shall be as close as possible to the terminal of the counter to make the signal line as short as possible  4. Avoid with other such as: high voltage wires or power wires and so on with same tube or twisted  trace line, in order to avoid unnecessary interference.If necessary, please use the shielded wire, shielding layer connect the"+" of the count terminals 5. It is not recommended to use a mechanical switch or micro switch because they have a relatively short life span and can be counted by mistake after long time. If you have to, please try better quality ones, strongly suggest a magnetic control switch Package Included: 1 x Tachometer 1 x Hall NPN proximity sensor
Shipping
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.