Daytona LCT LCK74, 5 midcaps, read description

Description

LCT LCK74 with daytona engine installed. Cycles great, feeds great, and fps is very consistent, but the hopup is inconsistent and I do not have the time or desire to fix it.
Barrel: Bolt 6.03/470mm stainless steel
Hopup bucking: Daytona REAPS bucking (two standard and one flat also included) - soft/flat tip adjustment screw installed
Magazines: LCT midcaps with maple leaf super feed springs and z custom enhanced followers
Rail mount: machined aluminum side rail, excellent quality
Optic: center point red/green dot
Extra daytona parts:
-2x brass airshaft springs
-2x standard buckings
-flat bucking
-plunger spring for mod - this may fix inconsistency, there is a second hop chamber included which was modified for use with the spring, though the feed tube threads are stripped, so it can serve as a reference for boring the good chamber out
-shortened airshaft, may or may not be useful - do not use with plunger spring mod unless you set the spring bore depth appropriately
I will bore the unmodified hop chamber to accept the plunger spring for . This needs to be done on a lathe, as one side of the chamber is open and a drill will damage it.
Attention ebay, this is not a firearm or firearm accessory, nor can it be modified to become one.