ONO SOKKI HT-5500 Handheld Digital Tachometer !!NEW!! ht5500

Description

Features
Wide measurement range from 6.0 r/min (low-speed rotation) to 99999 r/min (high-speed rotation)
■
Lo range
6.0 to 600.0 r/min
■
Hi range
6 to 99999 r/min
Capable of both contact and non-contact measurement in one unit
Built-in memory function - 20 data (MAX) can be saved to memory.
Line speed measurement is possible by setting the diameter of rotational object even though it is non-contact measurement. (Circumferential ring such as KS-100/KS-200 should be attached at HT-5500 when it is contact measurement.)
Accumulating rotation can be measured. (1 pulse/rotation by contact measurement. 1 count/1 reflection mark to 9999 is possible by non-contact measurement
Both analog and pulse outputs provided as standard
■
Analog output
0 to 1 V/0 to F.S. (Full scale can be set arbitrarily), 10-bit D/A conversion
■
Pulse output
Hi level = At least +4.5 V, Lo level = Up to +0.5 V
Can be used by AC power supply. (Optional AC adaptor PB-7090 is required.)
Hold function of Max. and Min. values of rotation, period and line speed.
Large LCD with backlight
Can be mounted on a tripod
Specifications
Detection methods
Optical reflective non-contact measurement; contact method (contact adapter supplied)
Measurement units
r/min, r/s (rotations)
m/min (line speed)
ms (cycle)
COUNT (cumulative count)
Measurement ranges
Non-contact method
Contact method
r/min (Hi range)
6 to 99999
6 to 20000
r/min (Lo range)
6.0 to 600.0
6.0 to 600.0
r/s
0.10 to 999.99 r/s
0.10 to 400.00 r/s
m/min
0.6 to 9999.9 m/min
0.6 to 400.0 m/min
COUNT
0 to 99999 COUNT
0 to 99999 COUNT
ms
0.6 to 9999.9 ms
2.5 to 9999.9 ms
Reflection detection distance
20 to 300 mm
Display
5-digit LED, with backlight (character height: 10.2 mm)
Measurement time
Within 1 s +  time required for one cycle (however, when the rotation is less than 60 r/min, twice the time required for one cycle (MAX))
Display update time
Approx. 1 s
Measurement accuracy
Displayed value
*
x (±0.02 %) ± 1 count
* The displayed value is the count value excluding figures after the decimal point.
Note:
▉
The measurement accuracy of the circumferential speed depends on the number of rotations of the rotating object.
▉
The measurement accuracy given above is for non-contact measurement. Measurement errors caused by hand shake are not included. With contact measurement, the smoothness and accuracy of the contact tip are added to the above value.
Peak hold function
Maximum value (MAX), minimum value (MIN)
Memory function
20 data (MAX)
Over-range function
The over-range alarm (ERROR mark) is displayed when the measured value exceeds the display range.
Rotation upper limit alarm function
The upper limit alarm ( ↑ mark) is displayed when the number of rotations exceeds the preset upper limit value.
Line speed calculation function
•
Calculates the line speed from the preset diameter value (mm) and the measured number of rotations
•
Use the KS-100/200 circumferential rings
Accumulating function
Provides a cumulative count of the input signal pulses
Cycle measurement function
Measures the input pulse cycle (however, when the cycle is less than 1 s, measures the mean value of the input pulses)
Analog output
Output voltage : 0 to 1 V/0 to F.S. (Full scale can be set arbitrarily.)
Conversion method : 10-bit D/A conversion
Linearity : ±1 %/F.S.
Output update time : Within 50 ms + 1 cycle
Temperature stability : ±0.05%/FS/°C (span & zero)
Setting error : ±0.5 %/F.S.
Load resistance : At least 100 kΩ
Pulse output
Output voltage : Hi level = At least +4.5 V, Lo level = Up to +0.5 V
Output logic : Positive logic
Load resistance : At least 100 kΩ
Operating temperature
0 to 40 °C
Storage temperature
-10 to 50 °C
Power source
Four AAA alkaline batteries or exclusive AC adapter (PB-7090 option)
Battery life
At least 32 hours (when the backlight is OFF)
At least 8 hours (when the backlight is ON)
Low battery alarm indicator
A low battery alarm mark (LOW) is displayed when the battery voltage falls below 4.4 V.
Outer dimensions
180.5 (W) X 47.5 (H) X 66 (D) mm
237.2 (W) X 47.5 (H) X 66 (D) mm (with the contact adapter)
Weight (including batteries)
Approx. 267 g
Approx. 329 g (with the contact adapter)
Accessories
Contact adapter (HT-0502) 1
Contact tip for rotation measurement (KS-300) 1
Circumferential ring (KS-200) 1
Reflective marks (12-mm square; 25 pcs.) 1 sheet
AAA alkaline batteries 4
Carrying case 1
Peripherals
(sold separately)
AX-501 Signal output cable (2-m length) (used for both analog and pulse outputs) ø2.5 pin plug—CO2 (BNC) plug
HT-0522 Magnetic stand + HT-0521A Stand jig
LA-0203A Measurement tripod (Used in combination)
PB-7090 AC adapter (100 to 240 VAC)
HT-0502 Contact adapter
KS-100 Circumferential ring (mm/s)
KS-200 Circumferential ring (m/min)
KS-300 Contact tip (for rotation measurement)
KS-700 Extension shaft for KS-300
HT-011 Reflective marks (10 sheets/pack)
Notice:
The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support!
Shipping:
We will ship all items within 1-3 working days upon receipt of payment,our goal is: ship it as fast as we can.
Standard Shipping: To USA,UK and Australia by ePacket,need 7-12 working days.
Expedited/Standard Int'l Shipping by Fedex,DHL,TNT and EMS courier: To USA,need 3-6 business days,To other countries,need 4-8 business days normally.But sometimes int'l delivery is highly depended on the courier company and local customs/duties.
Import duties and taxes are not included in the item price or shipping charges.These charges are the buyer responsibility.
Warranty&Reture Policy:
We encourage all customers to communicate with us through eBay messages. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you
A 1 year warranty is offered for this product.If the product malfunctioned under proper usage per instructions
manual within the warranty period, please contact us to obtain shipping instructions and send it back at your shipping costs.
30 days evaluation and investigation takes placed after receiving your return item.A brand new replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.
On Feb-05-20 at 15:39:21 PST, seller added the following information: