Tachometer 4-Digital LED Tach RPM Speed Meter With Hall Proximity Switch Sensor

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Tachometer 4-Digital LED Tach RPM Speed Meter W/ Hall Proximity Switch Sensor
Popular
Popular
Product Introduction
Feature:
100% Brand new and high quality.
With a standard size, easy to install.
Have good stability, high measurement precision.
Strong anti-jamming capability.
Specification:
-Power requirement: DC 8-15V
-Measure range: 10-9999RPM
-Clear zero: Automatic
-Display refresher rate: 3 Times/Sec
-Measure indication: RPM<5000,±2;RPM>5000,±3
-Display: Blue&Green 0.56" LED
-Response frequency: 100HZ
-Tachometer dimension: 72x36x20mm
-Panel cutout Dimension: 68x33mm
-Sensor Dimension: 12x55mm
-Proximity output current: 200mA
-Sensor wiring: brown-Power+;blue-Power-;black-signal
-Operating temperature: 0 to 50°C.
Package Included:
1 x New GREEN LED Tachometer RPM Speed Meter
1 x Hall Proximity Switch Sensor NPN
Note:
Colors may differ slightly from the pictures.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Tachometer 4-Digital LED Tach RPM Speed Meter W/ Hall Proximity Switch Sensor
Product Introduction
Feature:
100% Brand new and high quality.
With a standard size, easy to install.
Have good stability, high measurement precision.
Strong anti-jamming capability.
Specification:
-Power requirement: DC 8-15V
-Measure range: 10-9999RPM
-Clear zero: Automatic
-Display refresher rate: 3 Times/Sec
-Measure indication: RPM<5000,±2;RPM>5000,±3
-Display: Blue&Green 0.56" LED
-Response frequency: 100HZ
-Tachometer dimension: 72x36x20mm
-Panel cutout Dimension: 68x33mm
-Sensor Dimension: 12x55mm
-Proximity output current: 200mA
-Sensor wiring: brown-Power+;blue-Power-;black-signal
-Operating temperature: 0 to 50°C.
Package Included:
1 x New GREEN LED Tachometer RPM Speed Meter
1 x Hall Proximity Switch Sensor NPN
Note:
Colors may differ slightly from the pictures.
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.